Largely manufactured from recycled glass (e.g. windscreens) and mineral base materials such as sand and without the use of binding agents. The ingredients are melted into molten glass, which is cooled and crushed into a fine powder. The powdered glass is poured into molds and heated (below the melting point) in a "sintering" process that causes the particles to adhere to one another. Next, a small amount of finely ground carbon-black is added and the material is heated in a "cellulation" process. Here, the carbon reacts with oxygen, creating carbon dioxide, which creates the insulating bubbles in the (material). CO2 accounts for more than 99% of the gas in the cellular spaces.
Cellulose insulation is a material made from recycled newspaper. The paper is shredded and inorganic salts, such as boric acid, are added for resistance to fire, mould, insects and vermin. The insulation is installed either blown or damp-sprayed depending on application.
Wood fibre
The success of wood fibre insulation derives from an attractive environmental profile combined with a whole bag of functions including rigid insulation, sheathing and sarking for timber frames, roofs and flooring as well as flexible insulation for studs and rafters.
Wood of course is renewable, it sequesters carbon during its growth and product production is relatively free from pollution. The insulation value of wood fibre boards is not as dimensionally efficient as some of the orthodox petro-chemical materials - but it's no slouch either - typically coming in with a 'k value' range of between 0.038-0.043 W/mK depending on format.
Hemp
Hemp fibres are produced from hemp straw of the hemp plant. Most hemp is imported, but an increasing amount of home-grown crop is becoming available. Hemp grows up to a height of nearly 4 metres within a period of 100-120 days. Because the plants shade the soil, no chemical protection or toxic additives are required for hemp cultivation. The product is composed of, usually, 85% hemp fibre with the ballance made up of polyester binding and 3-5% soda added for fire proofing.
Straw
Straw is an agricultural by-product, the dry stalks of cereal plants, after the grain and chaff have been removed. Straw makes up about half of the yield of cereal crops such asbarley, oats, rice, rye and wheat.
PIR insulation board, short for PolyIsocyanuRate (PIR), is one of the most capable and valuable heat resistant materials used in UK constructions that can be used to insulate buildings for energy conservation. It is ideal for in-between and under rafters in a pitched roof or for under-slab concrete floors and also for internal stud wall applications and wall lining to existing walls, roof, wall, timber frame, loft, floor and caravan applications. This evolution of polyurethane is stronger and has greater thermal resistance and in fact, PIR offers the highest R-value of any material per thickness. Its rigid core is usually sandwiched between two aluminium foil facings that are high performance, thus creating a tough, hard wearing yet lightweight insulation board. The "rigid" part of the name comes from the fact that unlike other forms of insulation, it doesn't come loose and compress after installation. Instead it's a solid, hard foam material. PIR insulation board is often associated with market leader Celotex company as they began producing rigid polyisocyanurate foam as first. In fact, Celotex invented the thinnest thickness of PIR insulation measuring only 12mm. Many PIR insulation brands, such as Celotex, Xtratherm, Kingspan or Recticel come with a grid marked on, which can act as a guide to help ensure the thermal insulation board is cut in a straight line. When working with a PIR insulation board you should be always looking for a nice, tight fit. For more information on how to cut PIR insulation click here. Moreover, this type of insulation can help you meet current and future Building Regulations. Rigid panels are designed to cover all general needs for thermal insulation, fire resistance and sound reduction and because of their versatility and high compressive strength 120kPa, PIR boards are often used in roofing jobs. The Celotex boards are also ideal for underfloor applications, where insulation is needed below the floor. PIR insulation turned out to be so good and practical that many people choose to buy a bit cheaper seconds PIR boards which, despite the fact that they were transported and stored, are highly durable and good quality products that they can be used second time. Furthermore, its insulation core and facings defend against mould and bacterial growth. Board is recognizable as an ultra-thin insulation for walls. The major advantage of PIR compared to other insulation materials is the insulation value. The Lambda value of PIR is situated between 0.021 to 0.032 W/mK. This means that PIR offers superior insulation with the same thickness. PIR or POLYISO boards can directly contribute to strategies for conserving energy and significantly reduce the effects of global warming. If you are looking for the thinnest PIR insulation clck here.For best type of insulation boards click here.
PIR INSULATION THICKNESS
The typical length and width of a PIR board is 2400mm by 1200mm. Each sheet is 8' x 4' and covers 2.88m2. PIR insulation boards are available in a range of thicknesses such as 12mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 90mm, 100mm, 110mm, 120mm, 125mm, 130mm, 140mm, 150mm, 165mm, 180mm and 200mm. The most common used thicknesses are 12mm, 15mm, 20mm, 25mm, 50mm and 100mm. If you are looking for 12mm Celotex TB4012 click here.
PIR RIGID INSULATION BOARDS MANUFACTURERS
Depending of thickness and brand, rigid insulation boards come in multiple name options, including Celotex GA4000, Celotex TB4000, Celotex XR4000, Xtratherm Thin-R, Kingspan TF70, Kingspan TP10, Kingspan TW55, Recticel Eurothane GP, Quinntherm, EcoTherm EcoVersal, IKO Enertherm ALU and Ballytherm PIR. Thinner insulation boards, ranging from 12mm to 50mm are offered by Celotex, Xtratherm, IKO Enertherm, Ecotherm and Kingspan.
PIR VS PHENOLIC
Phenolic boards have a slightly higher R-value and a slightly thinner profile than PIR boards due to the manufacturing process. While PIR offers the lambda value of 0.022 W/mK, phenolic closed cell foam offers 0.018W/mK. For comparison, Celotex makes polyisocyanurate rigid foam, so perhaps phenolic is only 10% better then PIR. While PIR insulation boards combine thermal efficiency with an economical price point, phenolic boards do tend to be more expensive. PIR foam is made through a chemical reaction that results in a closed-cell structure that traps gas. Because this gas transfers less heat than still air, it is one of the most energy-efficient insulating materials on the market.
TYPES OF PIR INSULATION
Depending on the application, there are several varieties of PIR boards.
CAVITY WALL PIR BOARDS
Cavity Wall PIR Boards - they are made of rigid polyisocyanurate (PIR), and are available in most popular 75mm cavity thickness and are sized to fit between cavity wall ties.
Insulated PIR is a combined product of polyisocyanurate (PIR) rigid insulation foam core bonded to 9.5mm or 12.5mm plasterboard that is suitable for internal applications, fixed with adhesive dot & dab direct bonding.
Plywood pir is a 3 in 1 solution to provide decking, vapour control layer and insulation in one application for use in warm flat roofs under traditional bituminous waterproofing and single-ply waterproofing membranes in new build and refurbishment flat roof projects.
OSB PIR board is a composite board of enhanced PIR (polyisocyanurate) core faced with foil on one side and 9mm OSB board on the other side which is very useful when applying hot bitumen on a flat roof without damaging the insulation.
The amount of money you spend on insulation can vary greatly depending on the type, so it's important to know what you're getting before you buy. For sure, PIR insulation is a cost-effective building material that will pay for itself over time. Boards are simply a better solution, enabling greater savings and better thermal insulation than standard polystyrene or mineral wool. The price of PIR insulation often depends on two factors. The first is the brand itself. When buying well-known brands, we often pay for the name itself. The second factor is the supplier location ('near me'). When buying PIR from local building merchants such as Wickes, B&Q we pay for 'off the shelf product', we can touch and see physically, while with an online supplier like us you can only get better deals without seeing a product. It is because products come to you directly from the manufacturer.
PIR VS OTHER INSULATION MATERIALS
The table below compares the most commonly-used insulation materials
mm
mm
mm
mm
mm
Material
Lambda (W/mK)
Density (kg/m³)
2.5
3.0
3.5
4.0
4.5
PIR
0.022
34
60
70
82
92
100
XPS
0.034
35-40
85
102
119
136
153
Stone wool
0.037
35
92
111
129
148
168
Cellulose
0.040
105-165
100
120
140
160
180
Polystyrene EPS
0.038
15-40
95
114
135
152
171
PIR APPLICATION
PIR foam panels can be used in a wide range of applications. These include:
Beam and block floors
Upgrading concrete slab floors
Between rafters
Between and under joists
Balconies and terraces
Timber frame wall lining
Timber frame walls sheathing
Suspended timber floors
Steel stud frame walls
Single timber frame wall lining
Rain-screen cladding
Pitched roof sarking
Concrete slab floors
Loft and attic insulation
Garage conversions
BENEFITS OF PIR INSULATION
Amongst the highest thermal values of any PIR insulation product available due to the product’s low thermal conductivity.
Not corrosive to metal over time.
Able to custom manufacture to different sizes.
Fast manufacturing turnaround times.
PIR Insulation Panels for Commercial and Domestic applications
Video credit:https://www.youtube.com/watch?v=HDhhyS5r8QE
100mm Unilin ECO/MA 360 Floor Insulation is a bio-enhanced, superior performance PIR rigid foam insulation board suitable for underfloor heating, solid and suspended floors.
It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high p..
Unilin ECO/MA 360 Premium Floor PIR Insulation Board (Floorboard)
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
100mm Unilin ECO360 meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing floors
100mm Unilin ECO/MA 360 Roof Insulation is a bio-enhanced, superior performance PIR rigid foam insulation board suitable for sloped roofs (ventilated, hybrid or warm roof).
Using pioneering environmentally conscious technology, ECO360 MA in roof applications will reduce heat loss while also deliv..
100mm Unilin ECO/MA 360 Bio-enhanced Roof PIR Insulation Board
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
Unilin ECO360 Roofs meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing roofs
100mm Unilin ECO/MA 360 (Sarking) Pitched Warm Roof Insulation is a bio-enhanced, superior performance PIR (polyisocyanurate) rigid foam insulation board suitable for pitched roofs.
Unilin Sarking Warm Roof Construction Board has the strength and thermal properties required to reach the high perf..
100x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF is an engineered floor insulation used to achieve Future Homes Standard and passive floor performance.
The Hyfloor Strip Foundation System provides effective insulation that has been detailed and installed professionally at the initial ..
100x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF
Engineered floor insulation with high performance foundation riser panels
Used to achieve Future Homes Standard and passive floor performance
Hyfloor System that provides thermal performance and robust detailing
Suitable for use with built-in full fill and partial fill wall insulation
110mm Celotex XR4000 PIR Insulation Board (XR4110) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, roof and ceiling cut-to-fit applications.
Celotex Insulation Board is an excellent ..
110mm Unilin ECO/CT CavityTherm 360 is an engineered full fill cavity insulation system providing added resilience against increases in wind-driven rain resulting from climate change.
When built into a traditional 110-150mm cavity using standard foundation widths and local building materials ECO/..
110mm CavityTherm ECO/CT Unilin Full Fill Cavity Insulation Board
Unilin ECO/CT 360 (CavityTherm) achieves U-Values down to 0.12 W/m2K
Lambda value of 0.020 W/mK with pioneering environmentally sensitive features
Minimising the threat of Thermal Bridging and improving the U-Value of the wall
Meets both the Climate Challenge 2030 and Low Energy Transformation Initiative
12mm Celotex TB4000 PIR Insulation Board (TB4012) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, ceiling and roof cut-to-fit applications.
Celotex Board is an excellent high-perform..
15mm PIR Rigid Insulation Board Xtratherm (Unilin) 1200mm x 1200mm is a thinnest rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Unilin (Xtratherm) PIR insulation boards are stable, rot proof and will remain..
1200mm x 1200mm x 15mm
Foil Faced PIR Rigid Foam Insulation Board
Certified thermal conductivity as low as 0.022W/mK!
15mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a thinnest PIR rigid thermal foam insulation board used in roof construction to achieve Future Home and Passive House Standards.
XT/PR Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal con..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin XT/TF Thin-R Timber Frame Insulation Board is a thinnest PIR rigid thermal foam insulation board used in wall construction to achieve Future Home and Passive House Standards.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conduct..
15mm Unilin XT/UF Thin-R Floor Insulation Board is a thinnest PIR rigid thermal foam insulation board used in floor construction to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/m..
15mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
15mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
15mm Unilin (Xtratherm) Thin-R Insulation Board (2400mm x 1200mm x 15mm) is an ultra thin rigid foil faced polyisocyanurate (PIR) thermal foam multi-application insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm (Unilin) Thin-R range is a high-efficienc..
20mm Kingspan ThermaFloor TF70 Floor Board is a fibre-free rigid thermoset foam insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
Thermafloor TF70 Kingspan is a high performance flooring insulation suitable for use below the scr..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS
Kingspan ThermaPitch TP10 Board 20mm is a high performance pitched roof insulation board with fibre-free rigid thermoset PIR foam core used for under rafter or between and over joist applications.
20mm Thermapitch TP10 Kingspan PIR 2400mm x 1200mm board is an insulation sheet suitable for tiled o..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES
20mm Kingspan Thermawall TW55 Insulation Board is a rigid insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan is a high performance insulation board suitable for use with timber frame and steel frame w..
21mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one so..
21mm Unilin FR/TP Warm Roof Insulation Decking is an insulated panel made of 15mm PIR rigid foam insulation core bonded to 6mm WBP grade plywood used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight f..
25mm Celotex CW4000 Partial Fill Cavity Wall Insulation Board (CW4025) is an easy to install PIR (polyisocyanurate) rigid insulation board, featuring a low emissivity foil facings with excellent thermal conductivity of 0.022 W/mk that is suitable for partial fill masonry cavity wall applications.
..
25mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 24..
25mm Xtratherm FR/ALU Flat Roof PIR Insulation Board Thin-R is a top-class polyisocyanurate foam core insulation board with vapour resistant gas-tight foil facers suitable for loose laid ballasted and mechanically fixed single ply waterproofing systems.
Thin-R FR/ALU is a thermally efficient roof..
BBA Certification No. 11/4817
Vapour resistant foil facers
Loose laid ballasted systems
Thermal Conductivity: 0.022W/mK
Compatible with mechanically fixed single ply systems
25mm Xtratherm Thin-R FR/BGM Flat Roof Insulation Board is a high-quality polyisocyanurate core (PIR) rigid insulation board with bitumen glass fibre and mineral glass facings designed for partially bonded, torched-on and built-up bituminous felt systems.
Thin-R Xtratherm FR/BGM 25mm x 600mm x 12..
BBA Certification No. 11/4878.
Built-up Bituminous Felt Systems
Insulation for Torched-on Systems
Insulation for Partially Bonded Systems
Mechanically Fastened or Loose Laid Ballasted Bituminous Systems
25mm Xtratherm Thin-R FR/MG Flat Roof Insulation is a high-quality polyisocyanurate foam core (PIR) insulation board with mineral coated glass facers designed for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
Xtratherm Flat..
25mm Kingspan Thermaroof TR26 LPC/FM is a high performance PIR insulation board for flat roofs, fully compatible with most mechanically fixed single-ply waterproofing systems and green roof systems.
The Thermaroof® TR26 LPC/FM Boards are manufactured with Nilflam® technology, a high performance r..
25mm Kingspan TR26 Flat Roof PIR Rigid Insulation Board
TR26 Thermal Conductivity (lambda) as low as 0.022W/mK
Compatible with mechanically fixed single-ply waterproofing
High performance PIR Rigid Insulation board for flat roofs
Fully compatible with green roof systems (2400mm x 1200mm)
25mm Kingspan Thermaroof TR27 is a flat roof insulation board used on roofs waterproofed with fully-adhered, single-ply, partially-bonded, built-up felt, mastic asphalt or cold liquid applied waterproofing.
Kingspan TR27 is manufactured to the highest standards offering a thermal conductivity of ..
25mm Recticel Eurothane General Purpose Insulation Board is an easy to cut and fit PIR rigid insulation board faced with a gas diffusion tight multilayer foil on both sides that is suitable for pitched roof, timber and steel framed walls, ceilings and floor applications.
Recticel Eurothane GP 240..
25mm Unilin FR/ALU Thin-R Flat Roof Insulation Board comprising a rigid polyisocyanurate (PIR) insulation board with a composite gas-tight foil facings on both sides.
Flat Roof Board FR/ALU is used as a thermal insulation and to create or improve falls on limited access concrete, timber or metal ..
25mm Unilin FR/ALU Thin-R Flat Roof PIR Insulation Board
Rigid PIR Insulation Board with a gas-tight foil facings on both sides
Used as a thermal insulation on timber or metal flat roof decks
High Performance Board used in conjunction with a vapour control layer
Used with a single-ply mechanically fixed roof waterproofing membrane
The 25mm Unilin Thin-R FR/BGM Flat Roof Insulation Board is faced with a polypropylene fleece finished bitumen glass-fibre working surface and a mineral glass facing to the underside.
FR/BGM boards are suitable for use with most bitumen based, partially bonded waterproofing systems typically incl..
Unilin FR/BGM Flat Roof Insulation Board 25mm x 600mm x 1200mm
Faced with a polypropylene fleece finished bitumen glass-fibre working surface
Faced with a mineral glass facing to the underside insulation board surface
Used for partially bonded torched-on built-up bituminous felt systems
Can be used as a cheaper alternative to Celotex and Kingspan TR24 Insulation
25mm Unilin Flat Roof FR/MG is a high performance Polyisocyanurate with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt.
FR/MG Insulation Board for use as a thermal insulation layer and to create or improve falls on limited ac..
25mm x 600mm x 1200mm Unilin FR/MG Flat Roof Insulation Board
High Performance PIR Insulation Board with mineral coated glass facers
For concrete, timber or metal flat roof decks in domestic and non-domestic buildings
Used below single ply waterproofing systems and partially bonded built-up felt
Can be used as a cheaper alternative to Celotex and Kingspan Therma Roof Insulation
25mm Unilin Thin-R XT/CW PIR Cavity Insulation Board is used in traditional masonry walls, built to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.
Unilin Cavity Wall (T&G) tongue and groove jointing offers a practical onsite solution..
25mm Unilin Thin-R XT/CW Partial Fill Cavity Wall Insulation Board
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CW improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
25mm Unilin Xtroliner XO/PR is a warm roof construction board, comprising a rigid foam modified Polyisocyanurate (PIR) core with robust textured low emissivity aluminium foil facings.
Using XO/PR used above or between the roof rafters ensures that the structure is kept at or near the internal env..
25mm Unilin XO/PR XtroLiner Pitched Warm Roof PIR Insulation Board
Used above or between the rafters reducing thermal stress and condensation risk
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Used on ventilated, hybrid or warm and sloped roofs to achieve most efficient U-values
25mm XO/UF Underfloor Heating Insulation Board Xtratherm Xtroliner is an improved performance PIR (polyisocyanurate) rigid foam floor insulation board with robust textured foil facings designed for ground supported floors, suspended floors and underfloor heating.
Xtratherm Xtroliner XO/UF is a BB..
Suitable for Underfloor Heating - UFH
High Compressive Strength >150 (kPa)
Premium PIR Insulation - Thermal Conductivity: 0.021W/mK
25mm XtroDeck XO/XD Unilin is faced with an embossed aluminum facing on both sides high performance flat roof board used for partially bonded, self adhered built-up bituminous felt roof systems.
Flat Roof Insulation XO/XD is manufactured to EN 13165 by Unilin Insulation with a declared lambda (th..
25mm Unilin Xtroliner XtroDeck XO/XD Flat Roof PIR Insulation Board
Premium Rigid PIR Insulation Board with an embossed aluminum facings
Used for partially bonded, self adhered built-up bituminous felt roof systems
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Unilin XtroDeck XO/XD flat roof insulation board may also be fully bonded
Tapered Roof Unilin TR/ALU 30-50mm is the tapered version of Flat Roof FR/ALU, it is faced on both sides with composite gas tight foil facings bonded to a Polyisocyanurate (PIR) core during manufacture.
Unilin TR/ALU Tapered Roof systems address most flat roof failures i.e. ponding of rainwater c..
30-50mm Unilin TR/BGM (Torch-on) is a high performance PIR tapered roof insulation with a polypropylene fleece finished bitumen/glass fibre working surface and a mineral glass facing to the underside.
Unilin TR/BGM boards are not reversible, they are suitable for use below most bitumen based part..
30-50mm Unilin Tapered Roof TR/MG is a high performance PIR with mineral coated glass facers used below single ply fully adhered roof membranes, waterproofing systems and partially bonded built-up felt.
Unilin TR/MG tapered roof insulation boards are embedded in a layer of bitumen on a 3G type fe..
30mm IKO Enertherm ALU PIR Insulation Board is a multi-functional insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gas-tight aluminium construction.
IKO PIR Insulation Board 30mm can be used on flat roofs, pitch roofs, loft floors, cavity walls, clad..
40mm Kingspan TW50 Thermawall Cavity Wall Insulation Board is a high-efficiency, BBA certified cavity insulation board designed for partial fill masonry cavity walls.
Thermawall TW50 is a stable and rot proof cavity wall insulation board used in newbuild and extension projects and will remain eff..
40mm Xtratherm XT/CW Partial Fill Cavity Wall is a high-quality, BBA certified, tongue and groove PIR insulation board with certified thermal conductivity of 0.022 W/mK designed for use in traditional masonry partial fill cavity walls.
Xtratherm Cavity Wall is a highly-durable, rot proof insulati..
50mm Celotex GA4000 PIR Insulation Board (GA4050) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for wall, floor, ceiling and roof cut-to-fit applications.
Celotex Insulation Board is an excellent h..
50mm Kingspan Thermaroof TR24 Flat Roof PIR Insulation Board is a high performance rigid insulation board for flat roofs, compatible with the majority of torch-applied waterproofing systems for both new build and refurbishment projects.
The core of Kingspan Thermaroof® TR24 is manufactured with N..
50mm XO/CW T&G Unilin, comprising a rigid polyisocyanurate (PIR) foam insulation board with a textured aluminium foil-facing on both sides, for use as partial fill insulation.
Xtroliner XO/CW improves U-Values and meets Future Homes standards, providing an excellent choice for passive and low ene..
50mm Unilin XO/CW T&G Insulation Board for Partial Fill Cavity Walls
Xtroliner XO/CW improves U-Values and meets Future Homes standards
XO/CW Providing an excellent choice for passive and low energy builds
Can achieve a passive U-Value of 0.15 W/m2K in a traditional cavity wall
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
50mm Unilin XO/SK XtroLiner Sarking (T&G) is an engineered tongue and grooved external roof insulation system with robust facings which meets the passive U-Value of 0.15 W/m2K.
The XtroLiner Sarking XO/SK offers a robust continuous layer of insulation, minimising the threat of Thermal Bridging an..
50mm Unilin XO/SK XtroLiner Sarking Warm Roof Construction Board (T&G)
XO/SK used over the rafters to meet the passive U-Value of 0.15 W/m2K
Unilin XO/SK engineered tongue and grooved external roof insulation system
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
50mm Unilin XT/CWP Thin-R Plus Partial Fill Cavity is a partial fill cavity system with engineered tongue and grooved joints to ensure insulation continuity and minimisation of thermal bridging.
The lower lambda (thermal conductivity) of 0.021 W/mK improves U-Values of the cavity and meets Future..
50mm Unilin Thin-R PLUS XT/CWP Partial Fill Cavity Wall Insulation
Reduced the Thermal Bridging and improved the U-Value of the wall
Low emissivity foil facing on XT/CWP improves the thermal performance
Recommended residual cavity width is 50mm (Building Regulations)
Most effective method of preventing wind-driven rain penetrating a wall
50mm Unilin XO/FB XtroLiner Framing Board is an insulation board designed for use in a wide range of constructions including steel or timber frame applications up to 11m in height.
XO/FB Framing Board used into the traditional cavity of the construction improves the value of the walls over the tr..
Unilin XO/FB XtroLiner Framing Board (Steel and Timber Frame Applications)
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire class
Used between studs or as an insulated sheathing in a wide range of constructions
Suitable for new build and refurbishment projects in buildings up to 11m in height
50mm Xtratherm Thin-R XT/CWP Cavity Wall Plus is a robust tongue and groove jointing PIR (polyisocyanurate) rigid insulation board with a low emissivity foil facings, used for traditional masonry partial fill cavity walls.
XT/CWP Cavity Wall Plus (T&G) is the best solution when building tradition..
50mm Xtratherm XT/CWP Cavity Wall Plus Insulation Board
Lower Lambda value (thermal conductivity) of 0.021 W/mK
Enhanced performance PIR (polyisocyanurate) rigid insulation
Easy to install tongue and groove (T&G) jointing system
Used as a traditional masonry partial fill cavity wall insulation
50mm Xtratherm Xtroliner XO/CW is an improved performance PIR (polyisocyanurate) tongue and groove insulation board with robust foil facings designed for partial fill cavity wall insulation with an approved thermal conductivity (lambda value) as low as 0.021W/mK.
This lower lambda improves U-Valu..
50mm Xtratherm Xtroliner Framing Board XO/FB is an improved performance PIR (polyisocyanurate) insulation board with robust textured foil facings designed for use in a wide range of construction including steel or timber frame applications up to 18m in height.
The Xtratherm Xtroliner XO/FB framin..
BBA Certificate 12/4956
Thermal Conductivity: 0.021W/mK
Reaction to Fire Euroclass C-s2, d0
Reduced Thermal Bridging - Robust Textured Foil
Suitable for Newbuild and Renovation up to 18m in height
50mm XO/SK Xtratherm Xtroliner Warm Pitched Roof Insulation is an improved performance PIR (polyisocyanurate) engineered tongue and grooved insulation board with robust textured foil facings designed for use in warm roof construction systems.
Xtratherm Xtroliner XO/SK 50mm is a premium external r..
50mm Unilin XO/UF XtroLiner Floorboard is faced with an embossed aluminum facing on both sides high performance floor insulation board suitable for underfloor heating applications.
Unilin XO/UF is lightweight, easy to install and combines high compressive strength with low thermal conductivity, p..
56mm Kingspan Thermaroof TR31 Structural Plywood Insulation for Flat Roof Decking is a high-quality 50mm PIR insulation board bonded to 6mm FSC certified plywood on one side and multilayer foil on the reverse side.
Kingspan TR31 Composite Structural Flat Roof PIR Board is a 3 in 1 solution desig..
56mm Unilin XO/STP Xtroliner Soffit Plus is an effective thermal and fire performance insulation solution used in structural ceiling applications in both commercial and residential buildings.
XO/STP Soffit Plus, comprising a rigid modified PIR core bonded to an impact-resistant 6mm building panel..
56mm Unilin XO/STP XtroLiner Soffit Plus Insulation for Structural Ceiling
Thermal and fire performance solution in structural ceiling applications
High performance insulation used in commercial and residential buildings
Impact-resistant 6mm building panel to which a decorative finish may be applied
Thermal conductivity (lambda) of 0.021 W/mK, Euroclass B s1 d0 fire classification
56mm Xtratherm Xtroliner XO/STP Soffit Insulation Board is a top-class two-in-one PIR insulation product which provides an effective thermal and fire performance solution in structural ceiling applications.
Used in commercial and residential buildings that can be fixed directly to the concrete sl..
75mm Unilin CavityTherm CT/PIR Insulation Board is a high performance composite board of enhanced PIR with a lambda value of 0.021 W/mK, for full fill cavity wall applications.
CavityTherm is proven to provide the most cost effective answer, not only reaching Future Homes Standard fabric U-Values..
75mm CavityTherm Unilin Insulation for full fill cavity wall applications
CavityTherm is an innovative built-in insulation for traditional walls
CavityTherm achieves passive level U-Values as low as 0.12 W/m2K
Made of an enhanced PIR core with thermal conductivity of 0.021W/mK
CavityTherm Unilin is a continuous insulation system for full fill cavities
75mm Xtratherm CT/PIR CavityTherm Thin-R is a cost effective rigid polyisocyanurate thermal insulation board used for traditional full fill cavity walls to provide excellent U-Values and meet the Passive House standards.
Xtratherm CT/PIR Cavity Wall insulation is a top-class composite board of en..
75mm Recticel Eurowall PLUS PIR Cavity Insulation Board is a high-performance polyisocyanurate rigid foam insulation board faced with a gas diffusion tight multilayer foil on both sides suitable for full fill cavity wall applications with a minimum residual cavity of 10mm, up to 25m in height.
Eu..
75mm Unilin XT/HYF HYFLOOR PIR Thin-R Plus is a thinnest floor insulation board with an excellent lambda value of 0.021 W/mK and outstanding thermal bridging performance.
Unilin Hyfloor XT/HYF has a superior thickness to performance ratio, allowing the lower targets required under Building Regula..
75mm Unilin XT/HYF HYFLOOR Thin-R Plus Floorboard Premium PIR
For use with underfloor heating, ground supported and suspended floors
Excellent lambda value (Thermal conductivity) of 0.021 W/mK
Unilin XT/HYF Meets U-Values specified in the Building Regulations
Improving the overall U-Value of the floor (XT/HYF HYFLOOR)
75mm Xtratherm Hyfloor XT/HYF Under Floor Insulation is an excellent tongue and grooved floor insulation board with a certified thermal conductivity (lambda value) of 0.021 W/mK which is suitable for use with underfloor heating.
Xtratherm Thin-R PLUS HYFLOOR XT/HYF has high compressive strength o..
75mm Xtratherm Thin-R PLUS XT/HYF Hyfloor Insulation Board
Enhanced performance PIR tongue and grooved floor insulation
PIR rigid foam core with low emissivity gas tight foil facings
Used for underfloor heating systems, solid and suspended floors
96mm Celotex TD4000 (TD4096) PIR Insulated Plywood Flat Roof Board is a 3 in 1 product designed to provide decking, vapour control layer and insulation for new and refurbishment flat roof applications.
Celotex TD4000 provides a quick and easy way to achieve effective thermally insulated flat roof..
96mm EcoTherm Eco-Deck Pre-Insulated Structural Flat Roof Decking is a solid high-quality PIR (polyisocyanurate) insulation board bonded to 6mm plywood on one side and multilayer foil on reverse side designed to deck and insulate in one simple application on new roofs or upgrading the thermal perfor..
Ceresit CT84 polyurethane low expansion, quick setting adhesive for fixing Kingspan K5, Expanded Polystyrene (EPS) and PIR boards known as insulation foam adhesive, is also used for filling gaps and stopping draughts.
With CT84 foam anchoring possible after approximately 2 hours - speeding up th..
Constructa-Pro Foam Adhesive Everbuild (750ml) is a powerful adhesive foam designed for use in a wide range of building applications like fixing plasterboards or bonding insulation boards and much more.
EVERBUILD® Constructa-Pro adheres well to most common building materials including stone, conc..
Constructa-Pro Foam Adhesive Everbuild 750ml
High-strength multi-purpose adhesive foam
Constructa-Pro adheres well to most common building materials
Once cured - rot-proof, moisture and temperature resistant
EVERBUILD® Constructa-Pro for wide range of building applications
Everbuild Dual Purpose PU Foam Cleaner (500ml) is an easy to use aerosol solvent-based cleaning agent used to remove and clean wet and uncured PU foam from tools and a wide range of substrates.
Foam Cleaner attaches to gun foam applicators for purging through; also includes a spray nozzle for use..
Everbuild Fire Rated B2 Expanding Foam Gun Grade (750ml) is a unique quick-setting one-part polyurethane fire rated expanding foam used for fixing, filling and insulating with fire resistant properties for up to 2 hours.
Gun Grade Fire B2 Foam EVERBUILD® expands on application 1.5 - 2 times its o..
Everbuild Gun Grade Expanding Foam 750ml is an economical quick setting polyurethane-based expanding foam adhesive and filler which expands greatly on application and yields up to 50 times the original can contents.
Expanding Foam EVERBUILD® can be cut, sawn, plastered and sealed over after appro..
Everbuild Gun Grade Expanding Foam 750ml
Economical quick setting polyurethane-based
Used to fill irregular gaps, insulate and sound deadens
Use in conjunction with Gun Foam Applicators
Foam adhesive and filler which expands greatly on application
Everbuild Pinkgrip Dryfix Wall Foam Adhesive (750ml) is a unique fast curing adhesive foam that has been specially developed for the rapid installation of plasterboard, insulated plasterboards, rigid insulation and other sheet materials.
Dryfix Drywall Foam Adhesive Pinkgrip Everbuild bonds easil..
EWI-240 Express Foam Adhesive for Internal and External Wall Insulation is a strong low pressure, quick setting polyurethane foam adhesive used for fixing EPS, XPS and PIR insulation boards.
This one-component low expansion premium foam adhesive provides an excellent adhesion to a variety of subs..
EWI-240 Foam Adhesive for fixing EPS, XPS and PIR insulation boards
Main applications: Internal and External Wall Insulation Boards
Fix and Fill Expanding Foam Everbuild 750ml is a one-part, quick-setting polyurethane foam in aerosol form supplied with attachable nozzles designed to fill irregular and broad gaps where most conventional fillers would fail.
EVERBUILD® Fix & Fill Foam expands on application up to 150% its origin..
Fix and Fill Expanding Foam Everbuild 750ml
Designed to fill irregular and broad gaps
Used for fixing, filling and insulating
Can be cut, sawn or plastered over after only 1 hour
EVERBUILD® Fix & Fill Foam with attachable nozzles
100mm Thin-R Plus XT/HYF Unilin Floorboard is a lightweight floor PIR rigid insulation board suitable for use with underfloor heating, ground supported and suspended floors.
Unilin Hyfloor XT/HYF has a superior thickness to performance ratio, allowing the lower targets required under Building Reg..
100mm Unilin XT/HYF HYFLOOR Thin-R Plus Floorboard Premium PIR
For use with underfloor heating, ground supported and suspended floors
Excellent lambda value (Thermal conductivity) of 0.021 W/mK
Unilin XT/HYF Meets U-Values specified in the Building Regulations
Improving the overall U-Value of the floor (XT/HYF HYFLOOR)
100mm Xtratherm Thin-R PLUS XT/HYF Hyfloor is an enhanced performance PIR tongue and grooved floor insulation board with a certified thermal conductivity of 0.021W/mK, used for underfloor heating systems, solid and suspended floors.
Xtratherm Thin-R PLUS HYFLOOR XT/HYF 100mm has high compressive ..
100mm Xtratherm Thin-R PLUS XT/HYF Hyfloor Insulation Board
Enhanced performance PIR tongue and grooved floor insulation
PIR rigid foam core with low emissivity gas tight foil facings
Used for underfloor heating systems, solid and suspended floors
106mm Celotex TD4000 (TD4096) PIR Insulated Plywood Flat Roof Board is a 3 in 1 product designed to provide decking, vapour control layer and insulation for new and refurbishment flat roof applications.
Celotex TD4000 2400mm x 1200mm provides a quick and easy way to achieve effective thermally in..
106mm EcoTherm Eco-Deck Pre-Insulated Structural Flat Roof Decking is a solid high-quality PIR (polyisocyanurate) insulation board bonded to 6mm plywood on one side and multilayer foil on reverse side designed to deck and insulate in one simple application on new roofs or upgrading the thermal perfo..
110mm Unilin ECO/CW 360 Cavity is a rigid PIR insulation board with textured robust low emissivity foil facings and engineered shiplap jointing used as a partial fill cavity wall insulation.
Unilin ECO/CW cavity system incorporates robust facings, engineered rebated jointing details, preformed co..
110mm x 450mm x 1200mm Unilin ECO/CW 360 Cavity Wall Insulation
Partial fill cavity wall insulation board with an engineered shiplap jointing
ECO/CW can achieve a Passive U-Value of 0.15 W/m2K in a traditional cavity wall
Minimising the threat of Thermal Bridging and improving the U-Value of the wall
Premium modified PIR insulation core with textured robust low emissivity foil facings
110x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF is a 110mm thick engineered floor insulation system used to achieve Future Homes Standard and passive floor performance.
The Hyfloor Strip Foundation System provides effective insulation that has been detailed and installed professional..
110x225x1200mm Hyfloor Strip Foundation System Unilin XT/HYF
Engineered floor insulation with high performance foundation riser panels
Used to achieve Future Homes Standard and passive floor performance
Hyfloor System that provides thermal performance and robust detailing
Suitable for use with built-in full fill and partial fill wall insulation
120mm Celotex XR4000 PIR Insulation Board (XR4120) is an easy to cut and install multi-purpose polyisocyanurate rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, roof and ceiling cut-to-fit applications.
Celotex Insulation Board is an excellent ..
125mm Unilin CavityTherm ECO/CT is a bio-enhanced composite cavity wall insulation board made using enhanced rigid PIR insulation with engineered jointing and recyclable HIPs face.
When built into a traditional 110-150mm cavity using standard foundation widths and local building materials ECO/CT ..
125mm CavityTherm ECO/CT Unilin Full Fill Cavity Insulation Board
Unilin ECO/CT 360 (CavityTherm) achieves U-Values down to 0.12 W/m2K
Lambda value of 0.020 W/mK with pioneering environmentally sensitive features
Minimising the threat of Thermal Bridging and improving the U-Value of the wall
Meets both the Climate Challenge 2030 and Low Energy Transformation Initiative
125mm Unilin ECO360 Floor Board, a rigid foam bio-enhanced PIR core with textured robust low emissivity foil facings, used for underfloor heating, solid and suspended floors.
It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high ..
125mm Unilin ECO 360 Premium Floor PIR Insulation Board (Floorboard)
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
Unilin ECO360 meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing floors
125mm Unilin ECO360 Roof PIR Board, a rigid foam bio-enhanced PIR core with textured robust low emissivity foil facings, used for sloped roofs (ventilated, hybrid or warm).
Using pioneering environmentally conscious technology, ECO360 MA in roof applications will reduce heat loss while also deliv..
125mm Unilin ECO/MA 360 Bio-enhanced Roof PIR Insulation Board
High performance - Thermal conductivity (lambda value) of 0.020 W/mK
Unilin ECO360 Roofs meets U-Values specified in the Building Regulations
RIBA/RIAI Climate Challenge 2030, LETI Standards, Future Homes Hub targets
Bio-enhanced board will significantly improve the U-Value of new and existing roofs
125mm Unilin ECO360 (Sarking) Pitched Roof PIR Board, a rigid foam bio-enhanced polyisocyanurate (PIR) core with textured robust low emissivity foil facings, suitable for pitched roofs.
Unilin Sarking Warm Roof Construction Board has the strength and thermal properties required to reach the high ..
20mm Celotex TB4000 PIR Insulation Board (TB4020) is an easy to cut and install multi-purpose polyisocyanurate (PIR) rigid foam insulation board featuring a low emissivity foil facings that is suitable for floor, wall, ceiling and roof cut-to-fit applications.
Celotex Insulation Board is an excel..
20mm Unilin XT/PR Thin-R Pitched Roof PIR Insulation Board is a rigid thermal foam insulation board used in roof construction, designed to achieve Future Home and Passive House Standards.
XT/PR PIR Board 20mm is a high performance foil faced insulation foam board with a certified thermal conducti..
20mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
20mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
20mm Unilin PIR Insulation Board XT/TF Timber Frame is used between studs or as an insulating sheathing material for steel and timber framing wall applications.
XT/TF Unilin PIR Board is a high performance foil faced rigid insulation foam with a certified thermal conductivity of 0.022W/mK which h..
20mm Unilin XT/UF Thin-R Floor Insulation Board is a rigid thermal foam insulation board used in floor construction, designed to achieve Future Home and Passive House Standards.
XT/UF Underfloor Unilin PIR Board is a high performance insulation with a certified thermal conductivity of 0.022W/mK w..
20mm Unilin PIR Polyisocyanurate Rigid Foam Insulation Board
Declared Lambda value of 0.022 W/mK (Thermal Conductivity)
20mm x 1200mm x 2400mm Foil Faced PIR Insulation Sheet
Reducing heat loss and saving money on future energy bills
20mm Xtratherm PIR Thin-R Insulation Board (2400mm x 1200mm x 20mm) is a rigid foil faced polyisocyanurate (PIR) thermal foam insulation board designed for roofs, walls, floors, timber and steel framed systems.
Xtratherm Thin-R range is a high-efficiency foil faced PIR insulation with a certified..
Kingspan ThermaFloor TF70 Floor Board 25mm is a rigid thermoset foam insulation board used to insulate solid concrete, suspended ground floors and for use with underfloor heating systems.
Thermafloor TF70 Kingspan is a high performance flooring insulation suitable for use below the screed, in blo..
Thermal conductivity of 0.022 W/mK
Easy to handle and install
BBA Certificate 14/5133
NSAI Agrément Certificate 03/0196
INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS
25mm Kingspan ThermaPitch TP10 PIR Insulation Board is a foil faced on both sides PIR fibre-free rigid thermoset foam insulation board used for under rafter or between and over joist applications.
Thermapitch TP10 Kingspan PIR 2400mm x 1200mm board is a high performance insulation suitable for ti..
25mm Kingspan Thermapitch TP10 Pitched Roof Board
Easy to handle and install - BBA Certificate 14/5133
Certified thermal conductivity of 0.022 W/mK
NSAI Agrément Certificate 03/0196
INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES
25mm Kingspan Thermawall TW55 PIR Insulation Board is an advanced PIR rigid foam insulation board used between studs or as an insulating sheathing material for steel and timber framing wall applications.
Thermawall TW55 Kingspan PIR 2400mm x 1200mm x 25mm is a high performance insulation board su..
26mm Xtratherm FR/TP Thin-R Thermal Ply Composite Board for Flat Roof is an insulated panel consist of PIR (polyisocyanurate) core with a composite foil facings, bonded to 6mm WBP grade plywood designed for new and refurbishment flat roofs.
FR/TP PIR and Plywood For Flat Roof is a three-in-one so..
26mm Unilin FR/TP Flat Roof Insulation Decking is a high performance insulated panel made of 20mm Unilin PIR insulation bonded to 6mm plywood used for new and refurbishment flat roof applications.
Unilin FR/TP Thermal Ply Flat Roof Insulation Board is faced to the under side with a gas-tight foil..
26mm Unilin FR/TP Warm Roof PIR Ply Insulation Board Decking
Used for new build and refurbishment flat roof applications
Creates a continuous Vapour Control Layer (Vapour Barrier)
PIR foam insulation core and 6mm plywood insulated decking
Unilin FR/TP Thermal ply flat roof insulation over joists board
30mm EcoTherm EcoVersal PIR Insulation Board 5 in 1 Solution is a universal multi-purpose fibre free rigid polyisocyanurate insulation core faced with an aluminium foil composite on both sides designed for insulating pitched roofs, floors, walls, ceilings and dormer cheeks.
Ecotherm Eco-Versal 24..
30mm Xtratherm FR/BGM Thin-R Flat Roof Insulation Board is a high-quality polyisocyanurate core (PIR) insulation board with bitumen glass fibre and mineral glass facing designed for partially bonded, torched-on and built-up bituminous felt systems.
Xtratherm Flat Roof Thin-R board can also be use..
BBA Certification No. 11/4878.
Built-up Bituminous Felt Systems
Insulation for Torched-on Systems
Insulation for Partially Bonded Systems
Mechanically Fastened or Loose Laid Ballasted Bituminous Systems
30mm Xtratherm Thin-R FR/MG Flat Roof Insulation is a high-quality polyisocyanurate foam core (PIR) insulation board with mineral coated glass facers designed for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
Xtratherm Flat..
30mm Recticel Eurothane General Purpose Insulation Board is an easy to cut and fit PIR rigid insulation board faced with a gas diffusion tight multilayer foil on both sides that is suitable for pitched roof, timber and steel framed walls, ceilings and floor applications.
Recticel Eurothane GP 240..
30mm FR/BGM Unilin Thin-R Flat Roof Insulation Board is a PIR (polyisocyanurate) rigid foam thermal insulation board used for partially bonded torched-on built-up bituminous felt systems.
FR/BGM boards are suitable for use with most bitumen based, partially bonded waterproofing systems typically ..
Unilin FR/BGM Flat Roof Insulation Board 30mm x 600mm x 1200mm
Faced with a polypropylene fleece finished bitumen glass-fibre working surface
Faced with a mineral glass facing to the underside insulation board surface
Used for partially bonded torched-on built-up bituminous felt systems
Can be used as a cheaper alternative to Celotex and Kingspan TR24 Insulation
30mm Unilin FR/MG comprises a rigid Polyisocyanurate (PIR) core between mineral glass facings suitable for use below single ply waterproofing systems and partially bonded built-up felt.
FR/MG Insulation Board for use as a thermal insulation layer and to create or improve falls on limited access c..
30mm x 600mm x 1200mm Unilin FR/MG Flat Roof Insulation Board
High Performance PIR Insulation Board with mineral coated glass facers
For concrete, timber or metal flat roof decks in domestic and non-domestic buildings
Used below single ply waterproofing systems and partially bonded built-up felt
Can be used as a cheaper alternative to Celotex and Kingspan Therma Roof Insulation
30mm Unilin FR/ALU is a high performance PIR rigid foam insulation board with vapour barrier built in used for mechanically fixed single ply waterproofing systems.
Flat Roof Board FR/ALU is used as a thermal insulation and to create or improve falls on limited access concrete, timber or metal fla..
30mm Unilin FR/ALU Thin-R Flat Roof PIR Insulation Board
Rigid PIR Insulation Board with a gas-tight foil facings on both sides
Used as a thermal insulation on timber or metal flat roof decks
High Performance Board used in conjunction with a vapour control layer
Used with a single-ply mechanically fixed roof waterproofing membrane
30mm Unilin XO/PR XtroLiner is an effective warm roof insulation board, comprising a rigid foam modified Polyisocyanurate (PIR) core with robust textured low emissivity foil facings.
Using XO/PR used above or between the roof rafters ensures that the structure is kept at or near the internal envi..
30mm Unilin XO/PR XtroLiner Pitched Warm Roof PIR Insulation Board
Used above or between the rafters reducing thermal stress and condensation risk
Rigid foam modified Polyisocyanurate (PIR) core with textured robust facings
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Used on ventilated, hybrid or warm and sloped roofs to achieve most efficient U-values
30mm XO/UF Underfloor Heating Insulation Board Xtratherm Xtroliner is an improved performance PIR (polyisocyanurate) rigid foam floor insulation board with robust textured foil facings designed for ground supported floors, suspended floors and underfloor heating.
Xtratherm Xtroliner XO/UF is a BB..
Suitable for Underfloor Heating - UFH
High Compressive Strength >150 (kPa)
Premium PIR Insulation - Thermal Conductivity: 0.021W/mK
40mm Celotex CW4000 Partial Fill Cavity Wall Insulation Board (CW4040) is an easy to install PIR (polyisocyanurate) rigid insulation board, featuring a low emissivity foil facings with excellent thermal conductivity of 0.022 W/mk that is suitable for partial fill masonry cavity wall applications.
..
40mm Xtratherm FR/ALU Flat Roof PIR Insulation Board Thin-R is a top-class polyisocyanurate foam core insulation board with vapour resistant gas-tight foil facers suitable for loose laid ballasted and mechanically fixed single ply waterproofing systems.
Xtratherm Thin-R FR/ALU 2400mm x 1200mm x 4..
BBA Certification No. 11/4817
Vapour resistant foil facers
Loose laid ballasted systems
Thermal Conductivity: 0.022W/mK
Compatible with mechanically fixed single ply systems
40mm IKO Enertherm ALU PIR Insulation Board is a multi-functional insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gas-tight aluminium construction.
IKO PIR Insulation Board 40mm can be used on flat roofs, pitch roofs, loft floors, cavity walls, clad..
40mm Kingspan Thermaroof TR27 Flat Roof Insulation Board is an easy to handle and install PIR insulation board compatible with most green roof systems.
Kingspan TR27 is manufactured to the highest standards in accordance with current building requirements offering a thermal conductivity of 0.027 ..
45mm Kingspan TW50 Thermawall is a high-performance cavity wall insulation board with a rigid thermoset polyisocyanurate (PIR) core designed for partial fill masonry cavity walls.
Thermawall TW50 is a stable and rot proof insulation board used in newbuild or extension projects and will remain eff..
45mm Xtratherm XT/CW Partial Fill Cavity Wall is a high-quality, BBA certified, tongue and groove PIR insulation board with certified thermal conductivity of 0.022 W/mK designed for use in traditional masonry partial fill cavity walls.
Xtratherm Cavity Wall is a highly-durable, rot proof insulati..
50-70mm Unilin TR/BGM Torch-on Tapered Insulation, a rigid foam polyisocyanurate board with a mineral-coated glass fibre facing on one side and a composite bitumen/glassfibre facing on the other.
Unilin TR/BGM boards are not reversible, they are suitable for use below most bitumen based partially..
50-70mm Unilin TR/ALU Tapered Roof Insulation is a high performance Polyisocyanurate (PIR) Tapered Roof Insulation with vapour-tight aluminium foil facings suitable for use with single ply membranes.
Unilin TR/ALU Tapered Roof systems address most flat roof failures i.e. ponding of rainwater caus..
50-70mm TR/MG Unilin Roof Board, comprising a rigid PIR foam core between mineral glass facings used below single ply fully adhered roof membranes, waterproofing systems and partially bonded built-up felt.
Unilin TR/MG tapered roof insulation boards are embedded in a layer of bitumen on a 3G type..
50mm Kingspan Therma TR26 is a PIR flat roof insulation board fully compatible with most mechanically fixed single-ply waterproofing systems and green roof systems.
The Thermaroof® TR26 LPC/FM boards are manufactured with Nilflam® technology, a high performance rigid thermoset polyisocyanurate (P..
50mm Kingspan TR26 Flat Roof PIR Rigid Insulation Board
TR26 Thermal Conductivity (lambda) as low as 0.022W/mK
Compatible with mechanically fixed single-ply waterproofing
High performance PIR Rigid Insulation board for flat roofs
Fully compatible with green roof systems (2400mm x 1200mm)
50mm Unilin XtroDeck XO/XD is a high performance flat roof insulation faced with an embossed aluminum facings used for partially bonded, self adhered built-up bituminous felt roof systems.
Flat Roof Insulation XO/XD is manufactured to EN 13165 by Unilin Insulation with a declared lambda (thermal ..
50mm Unilin Xtroliner XtroDeck XO/XD Flat Roof PIR Insulation Board
Premium Rigid PIR Insulation Board with an embossed aluminum facings
Used for partially bonded, self adhered built-up bituminous felt roof systems
Lambda (thermal conductivity) of 0.021 W/mK and Euroclass C s2 d0 fire classification
Unilin XtroDeck XO/XD flat roof insulation board may also be fully bonded